Call us 9:00am - 6:00pm

+91 8588880397

Monday to Friday

9:00am - 6:00pm

Curvilinear Edge Bander J-3000

Awesome Image

Curvilinear Edge Bander J-3000


Icone

Salient Features :

  • This is an extremely flexible machine for application of PVC/ABS or Veneer on straight or shaped or 45° panels. The Edge Banding is a semi-automatic machine for curvilinear work piece, wherein the predefined length of PVC/ABS to be glued to the laminate can be set for repetitive work piece and the digital temp.
  • 45° Edge Banding panels are widely used for mfg. handleless drawer, door frame, worktable etc.
  • Pneumatic cutting device for pre-defined length, with foot switch.
  • Electronic digital millimeter counter to adjust the length
  • Glue roller apply glue on board & tape for perfect bonding
  • German gearbox for smooth & power drive with long life synthetics lubrication.
  • Easy regulation of variable speed 4 to 12 m/min
  • Revolving edge coil holder plate 525 mm. Ø
  • Automatic lowering of the glue temperature after a temporary non-use of the machine
  • Hard chrome steel rollers to support & guide the work piece
  • Working table with specially designed hylum surface for heat insulation & frictionless movement of work piece
  • Tilting working table from 0° to 45° with height adjustment up to 3 mm
  • Electronic digital temp. controller with safety circuit, which allows to start the drive motor only when the hot glue has reached the set temperature


Model No
J-3000
Unit
Value
Table size (L x B)
mm
1150 x 900
Minimum work piece length
mm
280
work piece thickness range
- Inclined 45° Edge
mm
10 - 25
- Full Straight Edge
mm
10 - 50
Edge Banding Thickness for PVC & ABS in coil form
mm
0.4 - 2.0
Min-Radius for curved Edging
mm
20
Glue pot capacity
kg
3
Feed speed
m/min
4 to 12
Front table adjustment (Up & Down)
mm
3
Front table tilt angle
degree
0° to 45°
Maximum setting temperature
°C
180°
Compressed air requirement
hp/kg/cm2
0.5 / 5 - 7
Heating element
kw
1.5
45° Tape groove motor
kw
0.73
Electric motor
kw
0.37 (415V, 3ø)
Power supply
voltage / ø
415V , 3ø
Total Power
hp
3.5
Machine dimension (L x B x H)
mm
2150 x 1100 x 1080
Approx. net weight
kg
330